http://www.uzaclan.com/forum/ | |
| LAN\WAN utilization and Flow Control http://www.uzaclan.com/forum/viewtopic.php?f=10&t=2041 |
Page 1 of 1 |
| Author: | {uZa} I_DI_EZ [ Mon Aug 01, 2011 8:36 pm ] |
| Post subject: | LAN\WAN utilization and Flow Control |
just a quick FYI. With recent updates of windows 7 64 bit. the default settings for your LAN adapter continue to be "Flow Control Disabled" Flow control is a crucial part of TCP/IP and IS REQUIRED for window correction. Over WAN this being disabled is not as apparent as across your local LAN, but an example is my network. With this disabled I was only getting a bouncing result between 40 and 70% out of 100mb. With flow control on I get a constant (with minimal bounces) at 95-99% of my pipe. I was experiencing some high latency and found this is set back to default hope this helps for those always looking for a lower latency route. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ | |